Homogenizer Bags for the easiest and safest sampling after stomaching

The Inlabtec Homogenizer Bags are compatible with all homogenizers/ stomachers/ bag mixers and are the only ones with a short seal at the bag opening. This allows the bags to be turned over sideways without liquid escaping for convenient sampling without the risk of pipette contamination.

Same degree of homogenization with or without filter

The Homogenizer Bags Filter have the sample filter integrated in the bag inlet area. This guarantees that the filter remains intact during homogenization in the stomacher. Furthermore, the filter has no influence on the degree of homogenization of the sample. With or without a filter, the result of the homogenization is the same. Only when the bag is turned over the suspension is filtered for particle-free sampling.

Prices and scope of delivery Homogenizer Bags

Homogenizer Bags are only available in Switzerland. The listed prices are in CHF excl. VAT.

Part. No.DescriptionQuantityPrice
100120Homogenizer Bags, 180 mm x 300 mm, 65 µm Polyethylene, sterile,
50 bags/ sachet
1+
10+
20+
26.46
23.81
21.38
100125Homogenizer Bags Filter, 180 mm x 300 mm, 65 µm Polyethylene, with filter inlet sterile, 50 bags/ sachet
1+
10+
20+
46.41
42.10
38.25
Specifications Homogenizer Bags
UseFor sample homogenization with all 400 ml lab blenders, homogenizers, stomachers, etc. Available with and without filter.
Dimensions180 mm x 300 mm
Max. working volume400 ml
MaterialHighest grade, virginal polyethylene (PE), colourless, tear-resistant
Thickness PE foil65 µm
SterilizationBy radiation according to ISO 1137-1/-2
FilterFleece, polypropylene (PP), 40 mm x 40 mm, welded
Packaging

50 Homogenizer Bags/ sachet (Sachet: PE , with marking of the removal side)

Clean and comfortable sampling independent of sample volume

Up to five homogenizer bags can be stored in the rack to save space. To take samples from the individual bags, the rack is folded down. If the bag contains more than 150 ml, the rack is folded down on the Rack Tilter. This allows the contents of the bag to be accessed by the pipette without liquid escaping. The upper position of the Rack Tilter is intended for 150 to 350 ml and the lower position for 350 to 500 ml bag contents.

Prices and scope of delivery Rack for Homogenizer Bags

The Rack for Homogenizer Bags is only available in Switzerland. The listed prices are in CHF excl. VAT.

Part. No.DescriptionQuantityPrice
100130

 

Rack, for storing and sampling up to 5 Homogenizer Bags with max. volumes 150 ml, stainless steel, fully autoclavable
1334.95
100131Rack Tilter, for the Inlabtec Rack, easy sampling out of Homogenizer Bags with volumes of 150-350 ml or 350-500 ml, stainless steel, fully autoclavable

152.00
Specification Rack for Homogenizer Bags

Rack

UseFor storing up to 5 Bags sized 180 mm x 300 mm with max. 500 ml.
For easy sampling by tilting if used with Inlabtec Homogenizer Bags.
MaterialStainless steel
Dimensions (W x H x D)160 mm x 300 mm x 170 mm
Weight1.7 kg

Rack Tilter

UseEnables the Rack two additional tilt angles for sampling out of Inlabtec Homogenizer Bags with 150 - 350 ml or 350 - 500 ml content.
MaterialStainless steel
Dimensions (W x H x D)110 mm x 60 mm x 210 mm
Weight

0.3 kg

Space-saving storage of individual bags

Homogenizer Bags from various manufacturers can be easily stowed away in the Bagboard for safe handling and space-saving storage. For labs who love a clear management of stomached samples.

Prices and scope of delivery Bagboard

The listed prices are in CHF excl. VAT and valid for Switzerland. In other countries, the prices of the respective distribution partner apply.

Part. No.DescriptionQuantityPrice
100135Bagboard 180 mm x 203 mm, PP, white transparent. Set of 10 pieces Bagboards inclusive resusable adhesive pads and 20 pieces protective sleeves
1+
10+
53.20
47.88
100141Protective sleeve for bagboards, 200 mm x 120 mm, PE, Set of 50 pieces
1+
10+
6.65
5.99
100142Frame Bagboard for up to 10 filled Bagboards, 200 mm x 190 mm x 95 mm (B x T x H), from unbreakable PET

1+
10+
63.86
57.48
Specifications Bagboard
UseFor handling and storage of Homogenizer Bags, Stomacher bags, etc. with max. width of 180 mm and a max. volume to 300 ml. With finger recesses and integrated closing clip.
Dimensions (W x H x D)180 mm x 230 mm x 10 mm
MaterialPolypropylene (PP), dishwasher safe and autoclavable.
Protective sleeve in Polyethylene (PE), for replacing
PackagingSet of 10 pieces Bagboards inclusive dishwasher safe adhesive pads and 20 pieces protective sleeves

More information on how to use our products can be found in Support.